operator using UI

 

NLSS 1-Door Systems

Select the configuration that meets your needs

 

HID Edge (Interior Installation)

 
The HID EdgeReader ERP40 is a unique multiCLASSTM reader with an IP-enabled intelligent access control processor and host interface solution in a single unit. With the same footprint as traditional reader solutions, the EdgeReader ERP40 provides a complete and full-featured access control hardware/software infrastructure and contactless smart card read/write capability at “the edge” of the network for OEM software host systems. A perfect solution for new building installations, the EdgeReader ERP40 requires less wiring, and controls every control function at the door.  
1 door config

HID Edge Plus (Interior or Exterior Installation)

 
The HID Edge+ E400 (Exterior use w/out card reader) is a solution which allows traditional Wiegand readers to be used in conjunction with an intelligent IP controller, installed on the secure side of the door.  
1 door config

(reader sold separately)

EP1501 - Single door controller POE

 
The EP1501 is a high-performance, Ethernet ready card reader panel, the EP1501 controls a single opening with Power over Ethernet (PoE) capability. Reader ports support separate in/out readers of all technologies, including Wiegand, clock and data, RS-485, magnetic stripe, keypads, LCD and biometrics. 2 inputs, 2 outputs, 150,000 card holders, 32 access levels.  
1 door config

EP1502 - Controller

 
The EP1502 is a multi-port controller platform for OEMs, providing a high-performance Ethernet ready, cost-effective dual card reader panel capable of controlling two doors. Available in a standard 6 MB memory configuration, making it cost effective for small to very large applications. A typical EP1502 with 6 MB of memory would hold up to 197,000 cards and store 50,000 events. Communication ports include a primary 10/100 Ethernet port, an RS-232 port, an RS-485 (2-wire) port, and a dial-up option. It supports up to 32 access levels per card, and like our 2g system, the EP1502 will support two doors, making it ideal for two-door systems.  
1 door config

Sargent Profile Series v.S1 PoE Locks

 
An ANSI/BHMA Grade 1 lock utilizing Power over Ethernet (PoE) technology, the v.S1 connects to the building’s Ethernet network, and can make decisions locally. Non-proprietary cable, PoE switches and midspans allow easy and cost-effective installations. Offering real-time door status monitoring and lockdown capability. The v.S1 is available in exit device, mortise and cylindrical lock configurations.  
1 door config

Profile Series v.S2 Wireless Locks

 
The SARGENT® Profile Series v.S2 intelligent Wireless products offer the ability to extend the reach of your access control systems using wireless technology. Using the building's WiFi infrastructure, the v.S2 can be added to locations where it would be difficult or cost-prohibitive to have a wired lock and provides complete access control features in online and offline operation with the ANSI grade 1 hardware. The v.S2 is available in mortise and cylindrical lock configurations, along with a variety of Trims and Finishes. Supports HID 125 kHz proximity formats.  
1 door config
 
   
   
Home | About | Contact | Terms of Use | Site Map | Privacy Policy
© 2010 Next Level Security Systems. All Rights Reserved.